Hitachi Compute Blade 500 Series User Manual page 79

• Switching the Virtual COM Console and System Console
The LPAR guest screens can be operated from either virtual COM console
or conventional system console. These two types of console are
exclusively available and operation by the conventional system console
takes precedence. The virtual COM console can operate LPAR guest
screens while the system console is displaying the LPAR manager screen.
Consoles to operate LPAR guest screens can be selected by switching an
LPAR guest screen and the LPAR manager screen on the system console.
Figure 2-4 Switching of Virtual COM / System Console
• Setting a Connection Method
Connect to the virtual COM console via either Telnet or SSH. Note that
Telnet and SSH cannot be used together.
When connecting to the virtual COM console, user authentication can be
performed. For Telnet connections, you can select whether to perform
user authentication. For SSH connections, user authentication is
mandatory. Be default, user authentication is disabled and Telnet
connections are selected.
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
System Operation
2-7