Hitachi Compute Blade 500 Series User Manual page 352

Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
9-18
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
No groups can be removed.
No group can be deleted.
Aborts the specified process.
Review the specified process.
Not Changed!! Select Device is Management Path.
When you tried to change the NIC schedule mode, it was not
changed because the selected NIC was set as the management
path.
Aborts the specified process.
Reconsider the specified processing.
NTP server is not set.
There is no NTP server setting.
Stop a time-getting of NTP server
Set the IP address of a NTP server to NTP Server 1 or NTP server
2.
Operation failed because system configuration is being
The operation was not accepted because the LPAR manager
configuration information is now being saved.
Aborts the specified process.
Wait a while, and then retry the specified process.
Over Max VLAN ID count (16).
The number of the specified VLANID exceeds 16.
Either automatically modifies the number of specified VLANID to
be less than 16, or keeps the message sub-screen on the terminal
display until [ESC] key is pressed.
Change the number of VLANID to be less than 16, or cancel the
VLANID setting operation by pressing [ESC] key.
Over the maximum number of activated LPARs (X).
The LPAR cannot be activated because it is beyond the max
number (X) of LPARs to activate with Essential model and
Advanced model.
Messages
updating.