Hitachi Compute Blade 500 Series User Manual page 216

No.
(9)
(10)
(11)
7-12
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Item
VN Displays the number of Logical NICs
allocated to the LPAR.
(Virtual
Network
Interface
Card)
PN [Non-NUMA]
Displays the Node number of processor
assigned to the LPAR.
Processor node cannot be set.
[When deactivating]
A: Shows that the Node number is
selected automatically when activating
LPAR.
[When activating]
A: Shows that the node has been
selected automatically.
[NUMA]
Displays the Node number of processor
assigned to the LPAR. Processor node
cannot be set.
[When deactivating]
A: Shows that the Node number is
selected automatically when activating
LPAR.
[When activating]
0 to Maximum Node number : Shows
that the only Node of the number
displayed is assigned to the activated
LPAR.
M: Shows the multiple Nodes are
assigned.The display item of a processor
node is shown below.
MN [Non-NUMA]
Displays the Memory Node number
allocated to the LPAR.
The Memory Node cannot be set.
[When deactivating]
A: When activating the LPAR, the Node
number will be selected automatically
and the free memory will be allocated
ascendingly.
[When activating]
A: Shows the Node number will be
selected automatically and the free
memory will be allocated ascendingly.
Operation by LPAR manager Screen
Description
Supported
Default LPAR
Value manager
Version
0 01-0X~
A 01-2X~
A 01-2X~