Hitachi Compute Blade 500 Series User Manual page 46

The status of the management path
Displays the state of the management path. In addition, if a link-down or
network failure occurs, an alert is sent to HCSM. The following lists each
status:
Item
Active
Standby
Error
Link down This indicates the path is in a link-down state.
Unknown
-----
To update the management path status, perform a diagnosis of the
management path.
You can display the management path status by the following operation:
Displaying management
path status
Displaying management path status System Service State → SVP Network Path
Displaying management path
status
Diagnosing the management path
LPAR manager diagnoses the path status of the standby system. To diagnose
the communication state periodically, enable management path periodical
diagnosis. You can display the current status by the following operations:
1-32
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Table 1-29 The status of the management path
This indicates the path is in the active state, and is used for communication
with the management module.
This indicates the path is in the standby state, and can be used for external
communication.
This indicates the path is in a network failure state.
This indicates LPAR manager is unable to communicate externally.
This indicates no port is specified for the path.
Table 1-30 Web Console
Item
Resources tab > Modules > All Modules > Server
Blades > Server Blades x > LPAR Manager tab
Table 1-31 LP screen
Item
Table 1-32 HVM management command (HvmSh)
Item
get ConfigAll → MANAGEMENT_PATH record in the
indication result
LPAR manager Functions
Description
Operation
Operation
State
Operation