Changing the Scheduling Mode to Dedicated Mode
1
On the [PCI Device Assignment] screen, place the cursor at Schd of the
.
PCI device whose scheduling mode is to be changed and press [Enter].
2
Reflect the changed scheduling mode of the PCI device into the LPAR
.
manager system. Press [F10] to display the [Save settings?] sub-screen.
Select "Yes" and press [Enter].
5-20
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Figure 5-27 Config Changing completion screen
Figure 5-28 Scheduling Mode Confirmation Screen
Setup of LPAR manager