Hitachi Compute Blade 500 Series User Manual page 315

The following table describes each item on this screen.
Table 7-34 Details of the LPAR Usage Screen
No. Item
(1) # Displays the LPAR numbers.
(2) Name Displays the LPAR name.
(3) Scd Displays a scheduling mode.
S: Shared mode
D: Dedicated mode
(4) Pro Displays the number of logical processors.
(5) Grp Displays a processor group number.
(6) SrvRatio Displays the service ratio of the LPAR when
the LPAR is in the shared mode. The values
in the field are set with Service Ratio (Srv)
on the LPAR Configuration screen.
Grp (ALL): "---" is displayed
Displays "---" when the LPAR is in the
dedicated mode.
(7) Srv(%) Displays the proportions of the LPAR's
service time to the service time of physical
processors running properly that are
assigned to the shared mode LPAR.
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Figure 7-83 LPAR Usage Screen
Description
Supported
Default LPAR
Value manager
Version
- 01-0X~
NO_NAME 01-0X~
D 01-0X~
- 01-0X~
- 01-0X~
--- 01-0X~
--- 01-0X~
7-111