Hitachi Compute Blade 500 Series User Manual page 215

Table 7-5 Details of the LPAR Configuration Screen
No. Item
(1) # Displays the LPAR numbers.
(2) Name Sets the LPAR name.
Maximum character length of LPAR
name is 31. And identical LPAR name
cannot set to 2 or more files.
The 8th character is changed to tilde '~'
and the later characters are omitted
when the length of LPAR name is 9 or
more.
'0' ~ '9', 'A' ~ 'Z', 'a' ~ 'z', '-'and '_' can
be used for LPAR name. However only
'A' ~ 'Z' and 'a' ~ 'z' can be used for the
initial character.
(3) Sta Displays the LPAR status.
Act (Activate): The LPAR is powered on.
Dea (Deactivate): The LPAR is powered
off.
Fai (Failure): The LPAR cannot be used
due to an unrecoverable failure. Reboot
LPAR manager when this happens.
Activate, deactivate and reactivate the
LPAR.
(4) Scd Sets a scheduling mode.
S: Shared mode
D: Dedicated mode
(5) Pro Sets the number of logical processors to
allocate to the LPAR. You can set a value
from 1 to 32 (for CB 520H A1/B1/B2/B3,
CB 520A A1, CB 540A A1/B1), and a
value from 1 to 64 (for CB 520X B1/B2).
(6) Grp Sets the processor group number.
(7) Srv Set a value between 1 and 999 as the
relative allocation (service ratio) of the
(Service
time an LPAR uses a physical processor
Ratio)
(Service-time).
This value is only meaningful for shared
mode LPARs. It is meaningless for
dedicated mode LPARs and cannot be
set for them.
(8) Mem Sets the memory size allocated to an
LPAR in units of MB. This is always a
multiple of 256.
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Description
Supported
Default LPAR
Value manager
Version
- 01-0X~
NO_NAME 01-0X~
Dea 01-0X~
D 01-0X~
- 01-0X~
D 01-0X~
100 01-0X~
1024 01-0X~
7-11