Lpar Manager Screen Messages - Hitachi Compute Blade 500 Series User Manual

Message Content
What to do
If any message other than described above, contact the reseller form which
you purchased the product or consult maintenance personnel.

LPAR manager Screen messages

Followings are the LPAR manager messages that appear on the console
screen when the processing for a screen operation has not concluded
normally.
Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
This LP F/W is not supported for this blade(Compute Blade
Please install another LP F/W supported for this blade.
XXXX : Server Blade Model
Please install another LPAR manager firmware supported for this
server blade.
The LPAR for which you tried to make a setting is active, so you
cannot make any settings now.
Aborts the specified process.
Make the setting again after the LPAR has been deactivated.
All groups are already added.
No group can be added.
Aborts the specified process.
Review the specified process.
All LPARs are already defined.
There is no LPAR left to be defined.
Aborts the specified process.
Review the process.
Auto activation for LPARx results in error.
Auto activation for LPARx failed.
Aborts the specified process.
Follow the instructions in subsequent messages.
Messages
XXXXXX).
Active LPAR Exist
9-9