Hitachi Compute Blade 500 Series User Manual page 48
Logical partitioning manager
Hide thumbs
Also See for Compute Blade 500 Series:
- User manual (506 pages) ,
- Management module setup manual (362 pages) ,
- Web console users manual (240 pages)
Table of Contents
Advertisement
¢
•
Do not configure VLAN settings for the management path in the OS or
LPAR manager.
When a VLAN is used for the management path, use the port base VLAN
functionality of the internal LAN switch module or the native VLAN
functionality.
When using different NICs for the management LAN and the operation LAN
The example of configuration shows as follows.
•
VLAN settings for the management path and operation path
1-34
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Communication is disabled when "Communication Failure between LP
and Management module." is displayed. After that, communication is
recovered when "Communication Recovery between LP and
Management module." is displayed.
System Service State screen
Communication is disabled when "SVP Network Path State" displays
"Connect:Fail". Communication is enabled when it displays
"Connect:Success".
Communication between the management module and LPAR manager
is disabled when "State:Active" is not displays at "SVP Network Path
State".
LPAR manager Functions
Advertisement
Table of Contents
