Hitachi Compute Blade 500 Series User Manual page 235

Figure 7-10 Physical Processors Configuration Screen
The following table describes each item on this screen.
Table 7-10 Details of Physical Processors Configuration Screen
No. Item
(1) Processor# Displays the physical processor numbers.
(2) Blade# Displays the server blade number on which
the physical processor is installed.
(3) Socket# Displays the die number/socket number in
the server blade.
(4) Core# Displays the core number in the die.
(5) Thread# Displays the thread number.
(6) State Display status of a core.
ACT (Activate): Normal state
(7) Status Displays the status of the physical
processor.
HIG: The physical processor is possible to
run at the highest rate.
The current clock frequencies of physical
processors might not run at the maximum
rate when a power capping function is
enabled, Turbo Mode is enabled or
processors are idle.
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Description
Supported
Default LPAR
Value manager
Version
- 01-0X~
- 01-0X~
- 01-0X~
- 01-0X~
- 01-0X~
- 01-0X~
- 01-0X~
7-31