Hitachi Compute Blade 500 Series User Manual page 361

Message Content
Explanation
What to do
Message Content
Explanation
What to do
Message Content
Explanation
What to do
Message Content
Explanation
What to do
Message Content
Explanation
What to do
Message Content
Explanation
What to do
Message Content
Explanation
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
LP detected different version of firmware on the NIC
A combination fault for NIC device firmware version was detected.
Check the all NIC firmware versions on the server blade are
same. If this action takes no effect, contact the reseller from
which you purchased this equipment or consult maintenance
personnel.
LP detected error of network communication at
management path.
A fault in the management path was detected. Internal LAN
segment overlaps with the management LAN segment.
Review the LP IP Address setting.
LP detected error of network communication for SVP
A communication fault occurred between LPAR manager and the
switch and management module.
Contact the reseller from which you purchased this equipment or
consult maintenance personnel.
LP detected Hardware error for Shared FC at expansion
A fatal fault in shared FC was detected.
Contact the reseller from which you purchased this equipment or
consult maintenance personnel.
LP detected Hardware error for Shared FC.
A fatal fault in shared FC was detected.
Contact the reseller from which you purchased this equipment or
consult maintenance personnel.
LP detected Initialization error for Shared NIC at expansion
A failure in initializing shared NIC was detected.
Contact the reseller from which you purchased this equipment or
consult maintenance personnel.
LP detected Initialization error for Shared NIC at Onboard.
A failure in initializing shared NIC was detected.
Messages
device.
access.
card.
card.
9-27