Hitachi Compute Blade 500 Series User Manual page 256

Inter-LPAR
packet
filtering
Disable (ALL)
Note:
• If you press [F8]: Packet Filter when the shared NIC, specified with the
cursor, is not defined in the network segment identifier, the sub-screen is
not displayed.
How to change the transmission bandwidth limitation for VF NIC
(for LPAR manager firmware version 01-9X or later)
Place the cursor at an item where an LPAR line crosses a VNIC number
column, and press [F9]: Set TXRATE to display the subscreen. Select a
numeric value to change, and press the [Enter] key.
When pressing [F1] on the subscreen, you can enter a numeric value by the
100 Mbps.
7-52
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Inter-LPAR packets
Inside Outside
LPAR LPAR
manager manager
Transmit Transmit
Figure 7-22 LPAR Packet Filtering Enabling Screen
Operation by LPAR manager Screen
Packets to
outside LPAR
manager
Transmit Permits Inter-LPAR
communication in the same
segment.
Used for inter-LPAR
communication using network
redundancy configuration such
as Intel(R) PROSet connection
monitoring with Windows and
bonding with Linux.
Purpose