Hitachi Compute Blade 500 Series User Manual page 242

The following table describes each item on this screen.
No.
(1)
(2)
(3)
(4)
(5)
7-38
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Figure 7-13 PCI Devices Assignment Screen
Table 7-14 Details of the PCI Devices Assigned Screen
Item
# Displays the LPAR numbers.
Name Displays the LPAR name.
Sta Displays the LPAR status.
Act (Activate): The LPAR is powered on.
Dea (Deactivate): The LPAR is powered off.
Fai (Failure): The LPAR cannot be used due
to an unrecoverable failure. Reboot LPAR
manager when this happens. If rebooting
LPAR manager cannot solve the problem,
contact your reseller or consult
maintenance personnel.
PCI Displays the number that LPAR manager
Device# gives each PCI
device for identification purposes.
Type Displays the PCI device type.
S: SCSI controller
N: Network interface Card (NIC)
Add "v" to the end of line when using VF
NIC.
Operation by LPAR manager Screen
Description
Supported
Default LPAR
Value manager
Version
- 01-0X~
NO_NAME 01-0X~
Dea 01-0X~
- 01-0X~
- 01-0X~