Finisher-T1/Saddle Finisher-T2/Puncher Unit-M1
The Finisher-T1 and Saddle Finisher-T2 are equipped with the following finishing
modes: Collate, Group, Offset, and Staple.
The Saddle Finisher-T2 is also equipped with the Saddle Stitch mode.
The Puncher Unit-M1 is equipped with the Hole Punch mode.
3
IMPORTANT
If the optional Copy Tray-L1 is attached, you cannot attach an optional finisher.
NOTE
•
Either the Finisher-T1 or Saddle Finisher-T2 can be attached to the main unit.
•
The Puncher Unit-M1 can be attached only if the Finisher-T1 or Saddle Finisher-T2 is
attached.
Parts and Their Functions
j
i
h
g
f
Saddle Finisher-T2
and Puncher Unit-M1
3-10
Finisher-T1/Saddle Finisher-T2/Puncher Unit-M1
a
b
c
e
j
i
h
Finisher-T1 and
Puncher Unit-M1
a
b
c
d