Sram Board <For Sys Board> - Toshiba e-STUDIO2020C Service Handbook

7.1.13 SRAM board <for SYS board>
(1) Take off the board cover.
P.7-2 "7.1.2 Board cover"
(2) Disconnect 2 connectors and take off the
HDD.
(3) Release 2 latches and take off the SRAM
board for the SYS board with the case.
(4) Release 2 latches and take off the SRAM
board for SYS board from the case.
© 2008 - 2011 TOSHIBA TEC CORPORATION All rights reserved
Fig. 7-32
Fig. 7-33
Latch
Fig. 7-34
e-STUDIO2020C/2330C/2820C/2830C/3520C/3530C/4520C
7 - 13
Latch
Latch
Case
SRAM board
(for SYS board)
Case
REPLACEMENT OF PC BOARDS/HDD
7