Dot1X Re-Authenticate - Edge-Core ECS4810-12M Layer 2 Management Manual

D
EFAULT
30 seconds
C
OMMAND
Interface Configuration
E
XAMPLE
Console(config)#interface eth 1/2
Console(config-if)#dot1x timeout tx-period 300
Console(config-if)#
This command forces re-authentication on all ports or a specific interface.
dot1x
re-authenticate
S
YNTAX
dot1x re-authenticate [interface]
C
OMMAND
Privileged Exec
C
OMMAND
The re-authentication process verifies the connected client's user ID and
password on the RADIUS server. During re-authentication, the client
remains connected the network and the process is handled transparently
by the dot1x client software. Only if re-authentication fails is the port
blocked.
E
XAMPLE
Console#dot1x re-authenticate
Console#
M
ODE
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-12)
M
ODE
U
SAGE
– 845 –
| Authentication Commands
C 24
HAPTER
802.1X Port Authentication