Snmp-Server Group - Edge-Core ECS4810-12M Layer 2 Management Manual

Hide thumbs Also See for ECS4810-12M Layer 2:
Table of Contents

Advertisement

| SNMP Commands
C
21
HAPTER
SNMPv3 Commands

snmp-server group

A remote engine ID is required when using SNMPv3 informs. (See the
snmp-server host
command.) The remote engine ID is used to compute
the security digest for authentication and encryption of packets passed
between the switch and a user on the remote host. SNMP passwords
are localized using the engine ID of the authoritative agent. For
informs, the authoritative SNMP agent is the remote agent. You
therefore need to configure the remote agent's SNMP engine ID before
you can send proxy requests or informs to it.
Trailing zeroes need not be entered to uniquely specify a engine ID. In
other words, the value "0123456789" is equivalent to "0123456789"
followed by 16 zeroes for a local engine ID.
A local engine ID is automatically generated that is unique to the
switch. This is referred to as the default engine ID. If the local engine
ID is deleted or changed, all SNMP users will be cleared. You will need
to reconfigure all existing users
E
XAMPLE
Console(config)#snmp-server engine-id local 1234567890
Console(config)#snmp-server engineID remote 9876543210 192.168.1.19
Console(config)#
R
C
ELATED
OMMANDS
snmp-server host
(771)
This command adds an SNMP group, mapping SNMP users to SNMP views.
Use the no form to remove an SNMP group.
S
YNTAX
snmp-server group groupname
{v1 | v2c | v3 {auth | noauth | priv}}
[read readview] [write writeview] [notify notifyview]
no snmp-server group groupname
groupname - Name of an SNMP group. (Range: 1-32 characters)
v1 | v2c | v3 - Use SNMP version 1, 2c or 3.
auth | noauth | priv - This group uses SNMPv3 with
authentication, no authentication, or with authentication and
privacy. See
"Simple Network Management Protocol" on page 445
for further information about these authentication and encryption
options.
readview - Defines the view for read access. (1-32 characters)
writeview - Defines the view for write access. (1-32 characters)
notifyview - Defines the view for notifications. (1-32 characters)
– 774 –
(page
776).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ecs4810-12m

Table of Contents