Edge-Core ECS4810-12M Layer 2 Management Manual page 596

| IP Services
C 16
HAPTER
Dynamic Host Configuration Protocol
Server IP Address – Addresses of DHCP servers or relay servers to be
◆
used by the switch's DHCP relay agent in order of preference.
W I
EB NTERFACE
To configure DHCP relay service:
Click IP Service, DHCP, Relay Option 82.
1.
Enable or disable Option 82.
2.
Set the Option 82 policy to specify how to handle Option 82 information
3.
already contained in DHCP client request packets.
Specify whether or not include "type" and "length" sub-options.
4.
Set the frame format used for the remote ID.
5.
Enter up to five IP addresses for DHCP servers or relay servers in order
6.
of preference.
Click Apply.
7.
Figure 349: Configuring DHCP Relay Information Option 82 Service
– 596 –