Lldp Dot3-Tlv Mac-Phy; Lldp Dot3-Tlv Max-Frame - Edge-Core ECS4810-12M Layer 2 Management Manual

This command configures an LLDP-enabled port to advertise its MAC and
lldp dot3-tlv
physical layer capabilities. Use the no form to disable this feature.
mac-phy
S
YNTAX
[no] lldp dot3-tlv mac-phy
D
EFAULT
Enabled
C
OMMAND
Interface Configuration (Ethernet, Port Channel)
C
OMMAND
This option advertises MAC/PHY configuration/status which includes
information about auto-negotiation support/capabilities, and operational
Multistation Access Unit (MAU) type.
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#no lldp dot3-tlv mac-phy
Console(config-if)#
This command configures an LLDP-enabled port to advertise its maximum
lldp dot3-tlv
frame size. Use the no form to disable this feature.
max-frame
S
YNTAX
[no] lldp dot3-tlv max-frame
D
EFAULT
Enabled
C
OMMAND
Interface Configuration (Ethernet, Port Channel)
C
OMMAND
Refer to
maximum frame size for this switch.
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#lldp dot3-tlv max-frame
Console(config-if)#
S
ETTING
M
ODE
U
SAGE
S
ETTING
M
ODE
U
SAGE
"Frame Size" on page 702
– 1285 –
| LLDP Commands
C 40
HAPTER
for information on configuring the