Table of Contents
Advertisement
◆
E
XAMPLE
The following example sets port 1 to Voice VLAN auto mode.
Console(config)#interface ethernet 1/1
Console(config-if)#switchport voice vlan auto
Console(config-if)#
This command specifies a CoS priority for VoIP traffic on a port. Use the no
switchport voice
form to restore the default priority on a port.
vlan priority
S
YNTAX
D
EFAULT
6
C
OMMAND
Interface Configuration
C
OMMAND
Specifies a CoS priority to apply to the port VoIP traffic on the Voice VLAN.
The priority of any received VoIP packet is overwritten with the new
priority when the Voice VLAN feature is active for the port.
E
XAMPLE
The following example sets the CoS priority to 5 on port 1.
Console(config)#interface ethernet 1/1
Console(config-if)#switchport voice vlan priority 5
Console(config-if)#
This command selects a method for detecting VoIP traffic on a port. Use
switchport voice
the no form to disable the detection method on the port.
vlan rule
vlan rule
command. When OUI is selected, be sure to configure the
MAC address ranges in the Telephony OUI list using the
mac-address
command.
All ports are set to VLAN hybrid mode by default. Prior to enabling VoIP
for a port (by setting the VoIP mode to Auto or Manual as described
below), ensure that VLAN membership is not set to access mode using
the
switchport mode
command.
switchport voice vlan priority priority-value
no switchport voice vlan priority
priority-value - The CoS priority value. (Range: 0-6)
S
ETTING
M
ODE
U
SAGE
– 1139 –
| VLAN Commands
C
36
HAPTER
Configuring Voice VLANs
voice vlan
Advertisement
Chapters
Table of Contents
