Copy - Edge-Core ECS4810-12M Layer 2 Management Manual

C U
OMMAND SAGE
◆ A colon (:) is required after the specified file type.
If the file contains an error, it cannot be set as the default file.
◆
E
XAMPLE
Console(config)#boot system config: startup
Console(config)#
R C
ELATED OMMANDS
dir (709)
whichboot (710)
This command moves (upload/download) a code image or configuration file

copy

between the switch's flash memory and an FTP/TFTP server. When you
save the system code or configuration settings to a file on an FTP/TFTP
server, that file can later be downloaded to the switch to restore system
operation. The success of the file transfer depends on the accessibility of
the FTP/TFTP server and the quality of the network connection.
S
YNTAX
copy file {file | ftp | running-config | startup-config | tftp}
copy running-config {file | ftp | startup-config | tftp}
copy startup-config {file | ftp | running-config | tftp}
copy tftp {file | https-certificate | public-key |
running-config | startup-config}
file - Keyword that allows you to copy to/from a file.
ftp - Keyword that allows you to copy to/from an FTP server.
https-certificate - Keyword that allows you to copy the HTTPS
secure site certificate.
public-key - Keyword that allows you to copy a SSH key from a
TFTP server.
running-config - Keyword that allows you to copy to/from the
current running configuration.
startup-config - The configuration used for system initialization.
tftp - Keyword that allows you to copy to/from a TFTP server.
D S
EFAULT ETTING
None
C M
OMMAND ODE
Privileged Exec
C 20
HAPTER
(See "Secure Shell" on page
– 705 –
| System Management Commands
File Management
827.)