Edge-Core ECS4810-12M Layer 2 Management Manual page 430

| Basic Administration Protocols
C 14
HAPTER
Link Layer Discovery Protocol
Select Add CA-Type from the Action list.
3.
Select an interface from the Port or Trunk list.
4.
Specify a CA-Type and CA-Value pair.
5.
Click Apply.
6.
Figure 234: Configuring the Civic Address for an LLDP Interface
To show the physical location of the attached device:
Click Administration, LLDP.
1.
Select Configure Interface from the Step list.
2.
Select Show CA-Type from the Action list.
3.
Select an interface from the Port or Trunk list.
4.
Figure 235: Showing the Civic Address for an LLDP Interface
– 430 –