This command displays settings for key command modes. Each mode
◆
group is separated by "!" symbols, and includes the configuration mode
command, and corresponding commands. This command displays the
following information:
■
■
■
■
■
■
■
■
■
■
E
XAMPLE
Refer to the example for the running configuration file.
R
ELATED
show running-config (697)
This command displays system information.
show system
D
EFAULT
None
C
OMMAND
Normal Exec, Privileged Exec
C
OMMAND
For a description of the items shown by this command, refer to
◆
"Displaying System Information" on page
If any POST test indicates "FAIL," contact your distributor for
◆
assistance.
E
XAMPLE
Console#show system
System Description : ECS4810-12M
System OID String
System Information
System Up Time
System Name
System Location
System Contact
MAC Address (Unit 1)
Web Server
Web Server Port
Web Secure Server
Web Secure Server Port : 443
Telnet Server
Telnet Server Port
MAC address for the switch
SNMP community strings
SNMP trap authentication
RMON alarms settings
Users (names and access levels)
VLAN database (VLAN ID, name and state)
Multiple spanning tree instances (name and interfaces)
Interface settings and VLAN configuration settings for each interface
IP address for management VLAN
Any configured settings for the console port and Telnet
C
OMMANDS
S
ETTING
M
ODE
U
SAGE
: 1.3.6.1.4.1.259.10.1.11
: 0 days, 3 hours, 11 minutes, and 23.2 seconds
:
:
:
: 70-72-CF-1C-BA-52
: Enabled
: 80
: Enabled
: Enabled
: 23
– 699 –
| System Management Commands
C
20
HAPTER
121.
System Status