Edge-Core ECS4810-12M Layer 2 Management Manual page 358

| Security Measures
C 13
HAPTER
Access Control Lists
W I
EB NTERFACE
To configure a time range:
Click Security, ACL.
1.
Select Configure Time Range from the Step list.
2.
Select Add from the Action list.
3.
Enter the name of a time range.
4.
Click Apply.
5.
Figure 189: Setting the Name of a Time Range
To show a list of time ranges:
Click Security, ACL.
1.
Select Configure Time Range from the Step list.
2.
Select Show from the Action list.
3.
Figure 190: Showing a List of Time Ranges
To configure a rule for a time range:
Click Security, ACL.
1.
Select Configure Time Range from the Step list.
2.
Select Add Rule from the Action list.
3.
Select the name of time range from the drop-down list.
4.
Select a mode option of Absolute or Periodic.
5.
– 358 –