Dot1X Re-Authentication - Edge-Core ES3628EA User Manual

ports.
Command mode: Admin Mode
Usage Guide: This command is an Admin Mode command. It makes the switch to
re-authenticate the client at once without waiting for re-authentication timer timeout. This
command is no longer valid after authentication.
Example: Enabling real-time re-authentication on port 0/0/8.
Switch#dot1x re-authenticate interface Ethernet 0/0/8

19.3.12 dot1x re-authentication

Command: dot1x re-authentication
no dot1x re-authentication
Function: Enables periodical supplicant authentication; the "no dot1x
re-authentication" command disables this function.
Command mode: Global Mode
Default: Periodical re-authentication is disabled by default.
Usage Guide: When periodical re-authentication for supplicant is enabled, the switch will
re-authenticate the supplicant at regular interval. This function is not recommended for
common use.
Example: Enabling the periodical re-authentication for authenticated users.
Switch(Config)#dot1x re-authentication
19.3.13 dot1x timeout quiet-period
Command: dot1x timeout quiet-period <seconds>
no dot1x timeout quiet-period
Function: Sets time to keep silent on supplicant authentication failure; the "no dot1x
timeout quiet-period" command restores the default value.
Parameters: <seconds> is the silent time for the port in seconds, the valid range is 1 to
65535.
Command mode: Global Mode
Default: The default value is 10 seconds.
Usage Guide: Default value is recommended.
Example: Setting the silent time to 120 seconds.
Switch(Config)#dot1x timeout quiet-period 120
19.3.14 dot1x timeout re-authperiod
740