Table of Contents
Advertisement
| Spanning Tree Commands
C
34
HAPTER
spanning-tree
mst configuration
C
M
OMMAND
ODE
Global Configuration
C
U
OMMAND
SAGE
Bridge priority is used in selecting the root device, root port, and
designated port. The device with the highest priority (i.e., lower numeric
value) becomes the STA root device. However, if all devices have the same
priority, the device with the lowest MAC address will then become the root
device.
E
XAMPLE
Console(config)#spanning-tree priority 40000
Console(config)#
This command changes to Multiple Spanning Tree (MST) configuration
mode.
D
S
EFAULT
ETTING
No VLANs are mapped to any MST instance.
The region name is set the switch's MAC address.
C
M
OMMAND
ODE
Global Configuration
E
XAMPLE
Console(config)#spanning-tree mst configuration
Console(config-mstp)#
R
C
ELATED
OMMANDS
mst vlan (1049)
mst priority (1048)
name (1050)
revision (1050)
max-hops (1048)
– 1046 –
Advertisement
Chapters
Table of Contents
