Trunk Status Display Commands; Show Lacp - Edge-Core ECS4810-12M Layer 2 Management Manual

| Link Aggregation Commands
C 28
HAPTER

Trunk Status Display Commands

Trunk Status Display Commands

show lacp

If the actor does not receive an LACPDU from its partner before the
◆
configured timeout expires, the partner port information will be deleted
from the LACP group.
When a dynamic port-channel member leaves a port-channel, the
◆
default timeout value will be restored on that port.
When a dynamic port-channel is torn down, the configured timeout
◆
value will be retained. When the dynamic port-channel is constructed
again, that timeout value will be used.
E
XAMPLE
Console(config)#interface port-channel 1
Console(config-if)#lacp timeout short
Console(config-if)#
This command displays LACP information.
S
YNTAX
show lacp [port-channel] {counters | internal | neighbors |
sys-id}
port-channel - Local identifier for a link aggregation group.
(Range: 1-12)
counters - Statistics for LACP protocol messages.
internal - Configuration settings and operational state for local
side.
neighbors - Configuration settings and operational state for
remote side.
sys-id - Summary of system priority and MAC address for all
channel groups.
D S
EFAULT ETTING
Port Channel: all
C M
OMMAND ODE
Privileged Exec
E
XAMPLE
Console#show lacp 1 counters
Port Channel: 1
-------------------------------------------------------------------------
Eth 1/ 2
-------------------------------------------------------------------------
LACPDUs Sent
LACPDUs Received
Marker Sent
Marker Received
– 988 –
: 12
: 6
: 0
: 0