Whichboot; Automatic Code Upgrade Commands; Upgrade Opcode Auto - Edge-Core ECS4810-12M Layer 2 Management Manual

| System Management Commands
C 20
HAPTER
File Management

whichboot

Automatic Code Upgrade Commands

upgrade opcode
auto
E
XAMPLE
The following example shows how to display all file information:
Console#dir
File Name
-------------------------- -------------- ------- ------------------- ----------
Unit 1:
ecs4810_12m_1.1.2.2.bix
ecs4810_12m_v1.1.4.10.bix
Factory_Default_Config.cfg
startup1.cfg
-----------------------------------------------------------------------------
Console#
This command displays which files were booted when the system powered
up.
S
YNTAX
whichboot
D S
EFAULT ETTING
None
C M
OMMAND ODE
Privileged Exec
E
XAMPLE
This example shows the information displayed by the whichboot
command. See the table under the dir command for a description of the
file information displayed by this command.
Console#whichboot
File Name
-------------------------------- ------- ------- ------------------- -----------
Unit 1:
ecs4810_12m_v1.1.4.10.bix
startup1.cfg
Console#
This command automatically upgrades the current operational code when a
new version is detected on the server indicated by the
path command. Use the no form of this command to restore the default
setting.
S
YNTAX
[no] upgrade opcode auto
– 710 –
Type Startup Modify Time
OpCode N 2013-10-07 11:09:12
OpCode Y 2012-10-19 08:12:39
Config N 2012-02-02 06:05:21
Config Y 2013-10-04 09:46:01
Free space for compressed user config files:
Type Startup Modify Time
OpCode Y 2012-10-19 08:12:39
Config Y 2013-10-04 09:46:01
Size(bytes)
12933584
12982728
455
1165
626688
Size(bytes)
12982728
1165
upgrade opcode