Show Snmp Engine-Id; Table 67: Show Snmp Engine-Id - Display Description - Edge-Core ECS4810-12M Layer 2 Management Manual

| SNMP Commands
C 21
HAPTER
SNMPv3 Commands
show snmp
engine-id
E
XAMPLES
This view includes MIB-2.
Console(config)#snmp-server view mib-2 1.3.6.1.2.1 included
Console(config)#
This view includes the MIB-2 interfaces table, ifDescr. The wild card is used
to select all the index values in this table.
Console(config)#snmp-server view ifEntry.2 1.3.6.1.2.1.2.2.1.*.2 included
Console(config)#
This view includes the MIB-2 interfaces table, and the mask selects all
index entries.
Console(config)#snmp-server view ifEntry.a 1.3.6.1.2.1.2.2.1.1.* included
Console(config)#
This command shows the SNMP engine ID.
C M
OMMAND ODE
Privileged Exec
E
XAMPLE
This example shows the default engine ID.
Console#show snmp engine-id
Local SNMP EngineID: 8000002a8000000000e8666672
Local SNMP EngineBoots: 1
Remote SNMP EngineID
80000000030004e2b316c54321
Console#

Table 67: show snmp engine-id - display description

Field Description
Local SNMP engineID String identifying the engine ID.
Local SNMP engineBoots The number of times that the engine has (re-)initialized since the
snmp EngineID was last configured.
Remote SNMP engineID String identifying an engine ID on a remote device.
IP address IP address of the device containing the corresponding remote
SNMP engine.
– 778 –
IP address
192.168.1.19