Edge-Core ECS4810-12M Layer 2 Management Manual page 406

| Security Measures
C 13
HAPTER
IP Source Guard
W I
EB NTERFACE
To configure static bindings for IP Source Guard:
Click Security, IP Source Guard, Static Configuration.
1.
Select Add from the Action list.
2.
Enter the required bindings for each port.
3.
Click Apply
4.
Figure 221: Configuring Static Bindings for IP Source Guard
To display static bindings for IP Source Guard:
Click Security, IP Source Guard, Static Binding.
1.
Select Show from the Action list.
2.
Figure 222: Displaying Static Bindings for IP Source Guard
– 406 –