Displaying Statistics For Oam Messages - Edge-Core ECS4810-12M Layer 2 Management Manual

| Basic Administration Protocols
C 14
HAPTER
OAM Configuration
D
ISPLAYING
S
TATISTICS FOR
OAM M
ESSAGES
Window Size – The period of time in which to check the reporting
■
threshold for errored frame link events. (Range: 10-65535 in units
of 10 milliseconds; Default: 10 units of 10 milliseconds, or the
equivalent of 1 second)
Threshold Count – The threshold for errored frame link events.
■
(Range: 1-65535; Default: 1)
W I
EB NTERFACE
To enable OAM functionality on the selected port:
Click Administration, OAM, Interface.
1.
Set the OAM administrative status and operational mode for the
2.
required ports. Specify whether or not critical link events will be
reported by the switch. Specify whether errored frame link events will
be reported, as well as the required window size and threshold.
Click Apply.
3.
Figure 316: Enabling OAM for Local Ports
Use the Administration > OAM > Counters page to display statistics for the
various types of OAM messages passed across each port.
CLI R
EFERENCES
"show efm oam counters interface" on page 1347
◆
"clear efm oam counters" on page 1344
◆
P
ARAMETERS
These parameters are displayed:
Port – Port identifier. (Range: 1-12)
◆
– 552 –