Banner Configure Lp-Number - Edge-Core ECS4810-12M Layer 2 Management Manual

| System Management Commands
C 20
HAPTER
Banner Information
banner configure
lp-number
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
Input strings cannot contain spaces. The banner configure ip-lan
command interprets spaces as data input boundaries. The use of
underscores ( _ ) or other unobtrusive non-letter characters is suggested
for situations where white space is necessary for clarity.
E
XAMPLE
Console(config)#banner configure ip-lan 192.168.1.1/255.255.255.0
Console(config)#
This command is used to configure the LP number information displayed in
the banner. Use the no form to restore the default setting.
S
YNTAX
banner configure lp-number lp-num
no banner configure lp-number
lp-num - The LP number. (Maximum length: 32 characters)
D S
EFAULT ETTING
None
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
Input strings cannot contain spaces. The banner configure lp-number
command interprets spaces as data input boundaries. The use of
underscores ( _ ) or other unobtrusive non-letter characters is suggested
for situations where white space is necessary for clarity.
E
XAMPLE
Console(config)#banner configure lp-number 12
Console(config)#
– 690 –