Edge-Core ECS4810-12M Layer 2 Management Manual page 440

| Basic Administration Protocols
C 14
HAPTER
Link Layer Discovery Protocol
Power Value – The total power in watts required by a PD device from
◆
a PSE device, or the total power a PSE device is capable of sourcing
over a maximum length cable based on its current configuration. This
parameter supports a maximum power required or available value of
102.3 Watts to allow for future expansion. (Range: 0 - 102.3 Watts)
Port Details – Inventory
Hardware Revision – The hardware revision of the end-point device.
◆
Software Revision – The software revision of the end-point device.
◆
Manufacture Name – The manufacturer of the end-point device.
◆
Asset ID – The asset identifier of the end-point device. End-point
◆
devices are typically assigned asset identifiers to facilitate inventory
management and assets tracking.
Firmware Revision – The firmware revision of the end-point device.
◆
Serial Number – The serial number of the end-point device.
◆
Model Name – The model name of the end-point device.
◆
W I
EB NTERFACE
To display LLDP information for a remote port:
Click Administration, LLDP.
1.
Select Show Remote Device Information from the Step list.
2.
Select Port, Port Details, Trunk, or Trunk Details.
3.
When the next page opens, select a port on this switch and the index
4.
for a remote device attached to this port.
Click Query.
5.
– 440 –
7