Show Ip Access-Group; Show Ip Access-List - Edge-Core ECS4810-12M Layer 2 Management Manual

show ip
access-group

show ip access-list

C M
OMMAND ODE
Interface Configuration (Ethernet)
C U
OMMAND SAGE
Only one ACL can be bound to a port.
◆
If an ACL is already bound to a port and you bind a different ACL to it,
◆
the switch will replace the old binding with the new one.
E
XAMPLE
Console(config)#int eth 1/2
Console(config-if)#ip access-group david in
Console(config-if)#
R C
ELATED OMMANDS
show ip access-list (931)
Time Range (745)
This command shows the ports assigned to IP ACLs.
C M
OMMAND ODE
Privileged Exec
E
XAMPLE
Console#show ip access-group
Interface ethernet 1/2
IP access-list david in
Console#
R C
ELATED OMMANDS
ip access-group (930)
This command displays the rules for configured IPv4 ACLs.
S
YNTAX
show ip access-list {standard | extended} [acl-name]
standard – Specifies a standard IP ACL.
extended – Specifies an extended IP ACL.
acl-name – Name of the ACL. (Maximum length: 32 characters)
C M
OMMAND ODE
Privileged Exec
– 931 –
| Access Control Lists
C 26
HAPTER
IPv4 ACLs