Table of Contents
Advertisement
W
EB
To bind an ACL to a port:
Click Security, ACL.
1.
Select Configure Interface from the Step list.
2.
Select Configure from the Action list.
3.
Select IP, MAC or IPv6 from the Type list.
4.
Select a port.
5.
Select the name of an ACL from the ACL list.
6.
Click Apply.
7.
Figure 202: Binding a Port to an ACL
After configuring ACLs, use the Security > ACL (Configure Interface – Add
C
ONFIGURING
Mirror) page to mirror traffic matching an ACL from one or more source
ACL M
IRRORING
ports to a target port for real-time analysis. You can then attach a logic
analyzer or RMON probe to the target port and study the traffic crossing
the source VLAN(s) in a completely unobtrusive manner.
CLI R
◆
"Local Port Mirroring Commands" on page 993
C
OMMAND
ACL-based mirroring is only used for ingress traffic. To mirror an ACL,
follow these steps:
Create an ACL as described in the preceding sections.
1.
I
NTERFACE
EFERENCES
U
SAGE
– 375 –
| Security Measures
C
13
HAPTER
Access Control Lists
Advertisement
Chapters
Table of Contents
