Lldp Basic-Tlv System-Capabilities; Lldp Basic-Tlv System-Description - Edge-Core ECS4810-12M Layer 2 Management Manual

lldp basic-tlv
system-capabilities
lldp basic-tlv
system-description
This command configures an LLDP-enabled port to advertise its system
capabilities. Use the no form to disable this feature.
S
YNTAX
[no] lldp basic-tlv system-capabilities
D S
EFAULT ETTING
Enabled
C M
OMMAND ODE
Interface Configuration (Ethernet, Port Channel)
C U
OMMAND SAGE
The system capabilities identifies the primary function(s) of the system and
whether or not these primary functions are enabled. The information
advertised by this TLV is described in IEEE 802.1AB.
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#lldp basic-tlv system-capabilities
Console(config-if)#
This command configures an LLDP-enabled port to advertise the system
description. Use the no form to disable this feature.
S
YNTAX
[no] lldp basic-tlv system-description
D S
EFAULT ETTING
Enabled
C M
OMMAND ODE
Interface Configuration (Ethernet, Port Channel)
C U
OMMAND SAGE
The system description is taken from the sysDescr object in RFC 3418,
which includes the full name and version identification of the system's
hardware type, software operating system, and networking software.
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#lldp basic-tlv system-description
Console(config-if)#
– 1281 –
| LLDP Commands
C 40
HAPTER