Description - Edge-Core ECS4810-12M Layer 2 Management Manual

C
OMMAND
◆ First enter this command to designate a class map and enter the Class
Map configuration mode. Then use
criteria for ingress traffic that will be classified under this class map.
One or more class maps can be assigned to a policy map
◆
The policy map is then bound by a service policy to an interface
(page
tagging, and bandwidth policing. Once a policy map has been bound to
an interface, no additional class maps may be added to the policy map,
nor any changes made to the assigned class maps with the
set commands.
E
XAMPLE
This example creates a class map call "rd-class," and sets it to match
packets marked for DSCP service value 3:
Console(config)#class-map rd-class match-any
Console(config-cmap)#match ip dscp 3
Console(config-cmap)#
R
ELATED
show class-map (1174)
This command specifies the description of a class map or policy map.

description

S
YNTAX
description string
string - Description of the class map or policy map.
(Range: 1-64 characters)
C
OMMAND
Class Map Configuration
Policy Map Configuration
E
XAMPLE
Console(config)#class-map rd-class#1
Console(config-cmap)#description matches packets marked for DSCP service
value 3
Console(config-cmap)#
U
SAGE
1174). A service policy defines packet classification, service
C
OMMANDS
M
ODE
– 1159 –
| Quality of Service Commands
C 38
HAPTER
match commands to specify the
(page 1162).
match or