Showing The Mtu For Responding Destinations; Table 40: Show Mtu - Display Description - Edge-Core ECS4810-12M Layer 2 Management Manual

| IP Configuration
C 15
HAPTER
Setting the Switch's IP Address (IP Version 6)
S MTU
HOWING THE
R
FOR ESPONDING
D
ESTINATIONS
Figure 337: Showing IPv6 Statistics (UDP)
Use the IP > IPv6 Configuration (Show MTU) page to display the maximum
transmission unit (MTU) cache for destinations that have returned an ICMP
packet-too-big message along with an acceptable MTU to this switch.
CLI R
EFERENCES
"show ipv6 mtu" on page 1395
◆
P
ARAMETERS
These parameters are displayed:

Table 40: Show MTU - display description

Field Description
MTU Adjusted MTU contained in the ICMP packet-too-big message returned from
this destination, and now used for all traffic sent along this path.
Since Time since an ICMP packet-too-big message was received from this
destination.
Destination Address which sent an ICMP packet-too-big message.
Address
W I
EB NTERFACE
To show the MTU reported from other devices:
Click IP, IPv6 Configuration.
1.
Select Show MTU from the Action list.
2.
Figure 338: Showing Reported MTU Values
– 584 –