Network-Access Link-Detection; Network-Access Link-Detection Link-Down - Edge-Core ECS4810-12M Layer 2 Management Manual

| General Security Measures
C 25
HAPTER
Network Access (MAC Address Authentication)
network-access
link-detection
network-access
link-detection
link-down
When used with 802.1X authentication, the intrusion-action must be
◆
set for "guest-vlan" to be effective (see the
command).
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#network-access guest-vlan 25
Console(config-if)#
Use this command to enable link detection for the selected port. Use the
no form of this command to restore the default.
S
YNTAX
[no] network-access link-detection
D S
EFAULT ETTING
Disabled
C M
OMMAND ODE
Interface Configuration
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#network-access link-detection
Console(config-if)#
Use this command to detect link-down events. When detected, the switch
can shut down the port, send an SNMP trap, or both. Use the no form of
this command to disable this feature.
S
YNTAX

network-access link-detection link-down

action [shutdown | trap | trap-and-shutdown]
no network-access link-detection
action - Response to take when port security is violated.
shutdown - Disable port only.
trap - Issue SNMP trap message only.
trap-and-shutdown - Issue SNMP trap message and disable
the port.
D S
EFAULT ETTING
Disabled
– 874 –
dot1x intrusion-action