Edge-Core ECS4810-12M Layer 2 Management Manual page 460

| Basic Administration Protocols
C 14
HAPTER
Simple Network Management Protocol
AuthPriv – SNMP communications use both authentication and
■
encryption.
Authentication Protocol – The method used for user authentication.
◆
(Options: MD5, SHA; Default: MD5)
Authentication Password – A minimum of eight plain text characters
◆
is required.
◆ Privacy Protocol – The encryption algorithm use for data privacy;
only 56-bit DES is currently available.
Privacy Password – A minimum of eight plain text characters is
◆
required.
W I
EB NTERFACE
To configure a local SNMPv3 user:
Click Administration, SNMP.
1.
Select Configure User from the Step list.
2.
Select Add SNMPv3 Local User from the Action list.
3.
Enter a name and assign it to a group. If the security model is set to
4.
SNMPv3 and the security level is authNoPriv or authPriv, then an
authentication protocol and password must be specified. If the security
level is authPriv, a privacy password must also be specified.
Click Apply
5.
Figure 256: Configuring Local SNMPv3 Users
– 460 –