Edge-Core ECS4810-12M Layer 2 Management Manual page 587

through the domain list, appending each domain name in the list to the
host name, and checking with the specified name servers for a match
(see "Configuring a List of Name Servers" on page
P
ARAMETERS
These parameters are displayed:
Domain Name – Name of the host. Do not include the initial dot that
separates the host name from the domain name. (Range: 1-68 characters)
W I
EB NTERFACE
To create a list domain names:
Click IP Service, DNS.
1.
Select Add Domain Name from the Action list.
2.
Enter one domain name at a time.
3.
Click Apply.
4.
Figure 340: Configuring a List of Domain Names for DNS
To show the list domain names:
Click IP Service, DNS.
1.
Select Show Domain Names from the Action list.
2.
Figure 341: Showing the List of Domain Names for DNS
– 587 –
| IP Services
C 16
HAPTER
Domain Name Service
588).