Displaying The Arp Inspection Log; Table 22: Arp Inspection Log - Edge-Core ECS4810-12M Layer 2 Management Manual

D
ISPLAYING THE
ARP I L
NSPECTION OG
W I
EB NTERFACE
To display statistics for ARP Inspection:
Click Security, ARP Inspection.
1.
Select Show Information from the Step list.
2.
Select Show Statistics from the Action list.
3.
Figure 209: Displaying Statistics for ARP Inspection
Use the Security > ARP Inspection (Show Information - Show Log) page to
show information about entries stored in the log, including the associated
VLAN, port, and address components.
CLI R
EFERENCES
"show ip arp inspection log" on page 912
◆
P
ARAMETERS
These parameters are displayed:

Table 22: ARP Inspection Log

Parameter
VLAN ID
Port
Src. IP Address
Dst. IP Address
Src. MAC Address
Dst. MAC Address
– 385 –
C
HAPTER
Description
The VLAN where this packet was seen.
The port where this packet was seen.
The source IP address in the packet.
The destination IP address in the packet.
The source MAC address in the packet.
The destination MAC address in the packet.
| Security Measures
13
ARP Inspection