Show Sntp; Manual Configuration Commands; Clock Summer-Time (Date) - Edge-Core ECS4810-12M Layer 2 Management Manual

show sntp

Manual Configuration Commands

clock summer-time
(date)
E
XAMPLE
Console(config)#sntp server 10.1.0.19
Console#
R C
ELATED OMMANDS
sntp client (737)
sntp poll (738)
show sntp (739)
This command displays the current time and configuration settings for the
SNTP client, and indicates whether or not the local time has been properly
updated.
C M
OMMAND ODE
Normal Exec, Privileged Exec
C U
OMMAND SAGE
This command displays the current time, the poll interval used for sending
time synchronization requests, and the current SNTP mode (i.e., unicast).
E
XAMPLE
Console#show sntp
Current Time : Nov 5 18:51:22 2006
Poll Interval : 16 seconds
Current Mode : Unicast
SNTP Status : Enabled
SNTP Server : 137.92.140.80 0.0.0.0 0.0.0.0
Current Server : 137.92.140.80
Console#
This command sets the start, end, and offset times of summer time
(daylight savings time) for the switch on a one-time basis. Use the no form
to disable summer time.
S
YNTAX
clock summer-time name date b-date b-month b-year b-hour
b-minute e-date e-month e-year e-hour e-minute [offset]
no clock summer-time
name - Name of the time zone while summer time is in effect,
usually an acronym. (Range: 1-30 characters)
b-date - Day of the month when summer time will begin.
(Range: 1-31)
– 739 –
| System Management Commands
C 20
HAPTER
Time