Mvr6 Associated-Profile - Edge-Core ECS4810-12M Layer 2 Management Manual

Table 172: Multicast VLAN Registration for IPv6 Commands (Continued)
Command
mvr6 vlan
mvr6 immediate-leave
mvr6 type
mvr6 vlan group
clear mvr6 groups
dynamic
clear mvr6 statistics
show mvr6
show mvr6
associated-profile
show mvr6 interface
show mvr6 members
show mvr6 profile
show mvr6 statistics
This command binds the MVR group addresses specified in a profile to an
mvr6
MVR domain. Use the no form of this command to remove the binding.
associated-profile
S
D
Disabled
C
Global Configuration
C
MRV6 domains can be associated with more than one MVR6 profile. But
since MVR6 domains cannot share the group range, an MRV6 profile can
only be associated with one MVR6 domain.
Function
Specifies the VLAN through which MVR multicast data is
received
Enables immediate leave capability
Configures an interface as an MVR receiver or source
port
Statically binds a multicast group to a port
Clears multicast group information dynamically learned
through MVR6
Clears the MVR statistics globally or on a per-interface
basis.
Shows information about MVR domain settings, including
MVR operational status, the multicast VLAN, the current
number of group addresses, and the upstream source IP
address
Shows the profiles bound the specified domain
Shows MVR settings for interfaces attached to the MVR
VLAN
Shows information about the current number of entries
in the forwarding database, or detailed information about
a specific multicast address
Shows all configured MVR profiles
Shows MVR protocol statistics for the specified interface PE
YNTAX
[no] mvr6 domain domain-id associated-profile profile-name
domain-id - An independent multicast domain. (Range: 1-5)
profile-name - The name of a profile containing one or more MVR
group addresses. (Range: 1-21 characters)
S
EFAULT ETTING
M
OMMAND ODE
U
OMMAND SAGE
– 1255 –
| Multicast Filtering Commands
C 39
HAPTER
MVR for IPv6
Mode
GC
IC
IC
IC
PE
PE
PE
PE
PE
PE
PE