Clear Ethernet Cfm Ais Mpid - Edge-Core ECS4810-12M Layer 2 Management Manual

Hide thumbs Also See for ECS4810-12M Layer 2:

Table of Contents

This example enables CFM on port 1.

This command clears AIS defect information for the specified MEP.

clear ethernet cfm

Privileged Exec

This command can be used to clear AIS defect entries if a MEP does not

exit the AIS state when all errors are resolved.

This example clears AIS defect entries on port 1.

An interface must be enabled before a MEP can be created with the

ethernet cfm mep

If a MEP has been configured on an interface with the

command, it must first be deleted before CFM can be disabled on that

When CFM is disabled, hardware resources previously used for CFM

processing on that interface are released, and all CFM frames entering

that interface are forwarded as normal data traffic.

Console(config)#interface ethernet 1/1

Console(config-if)#ethernet cfm port-enable

Console(config-if)#

clear ethernet cfm ais mpid mpid md domain-name ma ma-name

mpid – Maintenance end point identifier. (Range: 1-8191)

domain-name – Domain name. (Range: 1-43 alphanumeric

ma-name – Maintenance association name. (Range: 1-43

alphanumeric characters)

Console#clear ethernet cfm ais mpid 1 md voip ma rd

Console(config)#

| CFM Commands

Defining CFM Structures

ethernet cfm mep

Chapters

Table of Contents