Mac-Authentication Max-Mac-Count; Clear Network-Access Mac-Address-Table - Edge-Core ECS4810-12M Layer 2 Management Manual

mac-authentication
max-mac-count
clear
network-access
mac-address-table
Use this command to set the maximum number of MAC addresses that can
be authenticated on a port via MAC authentication. Use the no form of this
command to restore the default.
S
YNTAX
mac-authentication max-mac-count count
no mac-authentication max-mac-count
count - The maximum number of MAC-authenticated MAC
addresses allowed. (Range: 1-1024)
D S
EFAULT ETTING
1024
C M
OMMAND ODE
Interface Configuration
E
XAMPLE
Console(config-if)#mac-authentication max-mac-count 32
Console(config-if)#
Use this command to clear entries from the secure MAC addresses table.
S
YNTAX
clear network-access mac-address-table [static | dynamic]
[address mac-address] [interface interface]
static - Specifies static address entries.
dynamic - Specifies dynamic address entries.
mac-address - Specifies a MAC address entry. (Format: xx-xx-xx-
xx-xx-xx)
interface - Specifies a port interface.
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-12)
D S
EFAULT ETTING
None
C M
OMMAND ODE
Privileged Exec
E
XAMPLE
Console#clear network-access mac-address-table interface ethernet 1/1
Console#
– 879 –
| General Security Measures
C 25
HAPTER
Network Access (MAC Address Authentication)