Show Protocol-Vlan Protocol-Group; Show Interfaces Protocol-Vlan Protocol-Group - Edge-Core ECS4810-12M Layer 2 Management Manual

| VLAN Commands
C 36
HAPTER
Configuring Protocol-based VLANs
show protocol-vlan
protocol-group
show interfaces
protocol-vlan
protocol-group
If the frame is untagged but the protocol type does not match, the
■
frame is forwarded to the default VLAN for this interface.
E
XAMPLE
The following example maps the traffic entering Port 1 which matches the
protocol type specified in protocol group 1 to VLAN 2.
Console(config)#interface ethernet 1/1
Console(config-if)#protocol-vlan protocol-group 1 vlan 2
Console(config-if)#
This command shows the frame and protocol type associated with protocol
groups.
S
YNTAX
show protocol-vlan protocol-group [group-id]
group-id - Group identifier for a protocol group.
(Range: 1-2147483647)
D S
EFAULT ETTING
All protocol groups are displayed.
C M
OMMAND ODE
Privileged Exec
E
XAMPLE
This shows protocol group 1 configured for IP over Ethernet:
Console#show protocol-vlan protocol-group
Protocol Group ID Frame Type
------------------ ------------- ---------------
1
Console#
This command shows the mapping from protocol groups to VLANs for the
selected interfaces.
S
YNTAX
show interfaces protocol-vlan protocol-group [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-12)
– 1130 –
Protocol Type
ethernet 08 00