Editing Vlan Groups; Vlan Database; Table 136: Commands For Editing Vlan Groups - Edge-Core ECS4810-12M Layer 2 Management Manual

E VLAN G
DITING ROUPS

vlan database

Table 136: Commands for Editing VLAN Groups

Command Function
vlan database Enters VLAN database mode to add, change, and
delete VLANs
vlan Configures a VLAN, including VID, name and state
This command enters VLAN database mode. All commands in this mode
will take effect immediately.
D S
EFAULT ETTING
None
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
Use the VLAN database command mode to add, change, and delete
◆
VLANs. After finishing configuration changes, you can display the VLAN
settings by entering the
Use the interface vlan
◆
mode and add or remove ports from a VLAN. The results of these
commands are written to the running-configuration file, and you can
display this file by entering the
E
XAMPLE
Console(config)#vlan database
Console(config-vlan)#
R C
ELATED OMMANDS
show vlan (1113)
– 1105 –
C
HAPTER
show vlan command.
command mode to define the port membership
show running-config
| VLAN Commands
36

Editing VLAN Groups

Mode
GC
VC
command.