Show Ethernet Cfm Maintenance-Points Remote Crosscheck; Link Trace Operations; Ethernet Cfm Linktrace Cache - Edge-Core ECS4810-12M Layer 2 Management Manual

| CFM Commands
C 41
HAPTER

Link Trace Operations

show ethernet cfm
maintenance-points
remote crosscheck
Link Trace Operations
ethernet cfm
linktrace cache
This command displays information about remote MEPs statically
configured in a cross-check list.
S
YNTAX

show ethernet cfm maintenance-points remote crosscheck

[domain domain-name | mpid mpid]
domain-name – Domain name. (Range: 1-43 alphanumeric
characters)
mpid – Maintenance end point identifier. (Range: 1-8191)
D S
EFAULT ETTING
None
C M
OMMAND ODE
Privileged Exec
E
XAMPLE
This example shows all remote MEPs statically configured on this device.
Console#show ethernet cfm maintenance-points remote crosscheck
MPID MA Name
---- --------------------
2 downtown
Console#
This command enables caching of CFM data learned through link trace
messages. Use the no form to disable caching.
S
YNTAX
[no] ethernet cfm linktrace cache
D S
EFAULT ETTING
Enabled
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
A link trace message is a multicast CFM frame initiated by a MEP, and
◆
forwarded from MIP to MIP, with each MIP generating a link trace reply,
up to the point at which the link trace message reaches its destination
or can no longer be forwarded.
Use this command to enable the link trace cache to store the results of
◆
link trace operations initiated on this device. Use the
linktrace command to transmit a link trace message.
– 1326 –
Level VLAN MEP Up Remote MAC
----- ---- ------ ------------------
4 2 Yes 00-0D-54-FC-A2-73
ethernet cfm