Configuring Amac Acl - Edge-Core ECS4810-12M Layer 2 Management Manual

| Security Measures
C 13
HAPTER
Access Control Lists
C
ONFIGURING
MAC ACL
A
Figure 199: Configuring an Extended IPv6 ACL
Use the Security > ACL (Configure ACL - Add Rule - MAC) page to
configure a MAC ACL based on hardware addresses, packet format, and
Ethernet type.
CLI R
EFERENCES
"permit, deny (MAC ACL)" on page 939
◆
"show ip access-list" on page 931
◆
"Time Range" on page 745
◆
P
ARAMETERS
These parameters are displayed:
Type – Selects the type of ACLs to show in the Name list.
◆
Name – Shows the names of ACLs matching the selected type.
◆
Action – An ACL can contain any combination of rules which permit or
◆
deny a packet.
◆ Source/Destination Address Type – Use "Any" to include all possible
addresses, "Host" to indicate a specific MAC address, or "MAC" to
specify an address range with the Address and Bit Mask fields.
(Options: Any, Host, MAC; Default: Any)
Source/Destination MAC Address – Source or destination MAC
◆
address.
◆ Source/Destination Bit Mask – Hexadecimal mask for source or
destination MAC address.
– 370 –